Automatically downloads temperature and operating data to an office PC.
  

• Radio signal picks up data automatically as trucks enter yard/depot 

• Significant reduction in labor costs to manually retrieve data 

• Communicates directly with SMART REEFER® 

• Downloads to PC and is available to transmit to other network stations 

• Continually monitors refrigeration units within signal range 

• Applicable for both truck and trailer operations

R:COM Base Station
The R:COM base station unit is mounted on the exterior of the building and is connected via cable to the PC running the R:COM SERVER software.

R:COM Relay Units
Up to 7 relays can be installed to form a R:COM radio network. The relays have two functions: 

• To extend the reach of the network beyond the area directly covered by the base station. 

• To provide multiple network paths to mobile units to improve communication reliability and performance of the network.

R:COM Mobile Units
These units are connected to the dataloggers and may be mounted on vehicles, buildings, etc. The R:COM mobile units provide: 

• Two RS232 serial ports (1200, 2400, 4800 and 9600 baud) for connection to multiple datalogging devices. 

• An Alert Signal input which can be connected to On/Off sensors such as door switches, or to alarm signal output from other equipment. 

• A 14 character programmable unit ID. 

• A vehicle identification tag to indicate what type of vehicle the R:COM unit is attached to. 

• A multilevel security system to control access to the datalogging device(s) attached to the R:COM unit.

 
For more information, contact your local dealer.