CSR-40 PowerSaver Plus
Unequalled energy savings. Unsurpassed reliability. Unmatched cargo protection. 
  

 
Standard Features

• R-134a refrigerant
   
• Scroll compressor:
  Exclusive Copeland® Glacier™ hermetic scroll compressor with Demand Cooling™, and ambient compensated internal overload and high-temperature protection
  • Type: hermetic Compliant Scroll® (one staionary and one orbiting), with radial and axial compliance allowing tolerance to liquid refrigerant and debris 
  • Rating: 6hp motor, 380/460V, 50/60 Hz 
  • Construction: steel shell with rigid internal mount of scroll and motor 
  • Oil: polyol ester 
  • Paint finish: corrosion-resistive paint
• Microprocessor controller
  The µP-3000 microprocessor controller provides thermostat, digital thermometer programming keypad, mode indicators, and a digital status readout window for displaying electronically recorded trip and cargo information 
  • µP-3000 includes PTI programs, manual test, self-diagnostic test, advanced service information and service help functions : 
  • An optional USDA-approved data recorder records operating conditions up to 365 days
  • The controller contains the following basic features and components:
    • Backlit LCD digital display
    • Mode indication LEDs
    • Alarm indicator functions
    • Defrost cycle control
    • Internal self-checking/diagnostics
    • Pre-trip testing for reefer unit
    • Remote monitoring and data retrevial interface ports
    • Data recording
  • Electronic phase selection
  • 3-phase current monitoring & protection
  • Power consumption control to limit total unit power consumption
     
• Proportional-integrated differential(PID) refrigeration capacity control system 
   
• Non-corrosive sea-going construction includes marine-treated aluminum alloy frame, non-corrosive fittings, all stainless steel hardware, receiver tank, water-based lacquer-coated condenser coil, hydrophilic coating on evaporator coil, and a marine duty protective coating on the compressor
   
• Condenser and evaporator fan motors include stainless steel shafts and internal thermal overload protection
   
• CFC-free foamed-in-place insulation
   
• Evaporator fan airflow:

  High Speed	m³/h	cfm
  60Hz: 12.7 mm (0.50 in) WG	5,603	3,300
  30Hz: 19.0 mm (0.75 in) WG	5,094	3,000
  Evaporator fans operate on demand depending on cargo and ambient temperature to reduce power draw from fan motors

• Fresh air exchange adjustable from 0-285 m³/hr (0-150 ft³/min)
   
• Unit wired for 380/460V, 3-phase, 50/60 HZ power supply with an 18 meter (60 ft) 11/4 power cable with CEE-17 plug
   
• Bottom air discharge
   
• Automatic electronic phase correction system
   
• 24 Vac control system
   
• Demand defrost and supplemental timed defrost
   
• Manual defrost initiation via µP-3000 keypad
   
• Cool, Modulation Cool, Null, Heat, Defrost, In-Range and alarm indicator lights
   
• Time delay start sequence
   
• ABS certification
   
• Composite condenser and evaporator fans
   
• Conforms to ISO classifications and specification for thermal containers including racking and end loading standards, TIR specifications, ATP refrigeration standards, ARI standards for rating refrigeration capacity, UIC international Union of Railways, Australian Electrical Certification, British Standard 3755 Requirement (TAINT), USDA requirements for "Insect Cold" treatment, and Agrotechnological Research Institute (ATO-DLO) for flower bulb transportation
   
• Auxiliary battery and charger
   
• USDA "Cold Treatment" provision
   
• Bulb mode

 
Optional Features

• Dual-voltage transformer 
• Water-cooled condenser 
• Humidity control 
• De-humidity control
• 4-pin remote monitoring receptacle 
• Partlow temperature recorder 
• Saginomiya temperature recorder 
• Remote monitoring
• Suction/discharge pressure gauges 
• Transfresh provision 
• 10/4 power cable 
• AFAM or AFAM+

Specifications are subject to change without notice. For more information, contact your local dealer.